Magna-Power MagnaDC xGEN Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology:

LabVIEW Plug and Play (project-style)

Manufacturer:

Magna-Power Electronics Inc.

Supported Language(s):

LabVIEW

Supported Model(s):

SLx Series (all models)

Model(s) Tested:

SLx1.5-1000-1.5/UI

Interface(s):

Serial, USB (Virtual Comport), Ethernet(Socket), LXI

Firmware Revision(s) Tested:

0.065

Certified:

Yes

NI Supported:

Yes

Source Code Available:

Yes

Driver Revision:

1.0

Original Release Date:

2/1/2024

Current Revision Date:

2/1/2024

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

NI-VISA 5.4 or later

Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»LabVIEW Help.

3. Installation

To install the Magna-Power LabVIEW driver: # Extract the contents of the .zip file to the subdirectory <National Instruments>\LabVIEW<xxxx>\instr.lib.

1. If you have LabVIEW open, close and restart it.
2. Make sure the instrument driver installed properly by checking if it appears in the LabVIEW palette. Right-click on the block diagram » Instrument I/O » Instrument Drivers.

4. Known Issues

To report issues or provide feedback about this instrument driver, please contact technical support.

5. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.0, 2/1/2024
Modified by: Adam Morawski, Valay Patel Flemington,NJ.
Original release.